Erecting a fence in front or in the back of your home is important for many different reasons. For one thing, a fence will be able to protect your home from intruders. Home invaders are a lot less likely to break into a home that has a large fence – a fence obstructs both the view in and out of the home, and it creates an obstacle for a clean getaway. A fence is also important if you have children or pets. If you live near a busy road, having a fence will ensure that your pets don’t rush out into the street. It could also save your child’s life. Here are some fence building basics for newbies.
- Decide on the type of fence that you want to build. If you visit Yard Dog Fence, or any other fence company, you will see that there are a lot of fence options. You can go for wood, you can go for metal, or you can go for a composite material. In most cases, you want to use your home as an aesthetic mark when choosing a fence material.
- Prep the area where you want to install the fence. Before you build a fence, you want to prep the area where you are going to install the fence. Prepping the area requires a few different steps. First, you want to make sure that you don’t go over your home’s property line. Next, you want to clear the area of any grass or foliage. After that, you want to level the ground. Ideally, you don’t want there to be any obstructions when you install your fence.
- Purchase the panels and treat the wood. After you prep the area, you want to purchase the panels and treat the wood. If there are any imperfections, you want to make sure to sand them down. Treating the wood is important if you plan on adding a stain later on. If you are trying to decide how many panels you need, you want to measure the area where you will be installing the fence. Based on that information, you will know how many posts you will need.
- Install the posts for the fence and then add a stain. Once you have the posts, you want to install them. Typically, you want to create marks where the posts will be installed and you want to have the spaces ready. It can add a lot of work to the installation process if you don’t dig the area where you will install the posts. Once you install the posts, you can then add a stain.
- Screw on the enforcement brackets to keep the fence in place. After you have the fence installed, you can then place enforcement brackets on the posts to ensure that the fence stays in place. You can usually use a drill to install the brackets. If you purchased your fence from a home supply shop, it may come with the brackets in the package. In the end, you want to enforce your fence if you want it to stand the test of time.