Energy Efficient Insulation Upgrades for Your Home

 UHome

If you were to speak with an energy expert about something that you can do in order to reduce the energy costs inside of your home, one of the things that they are probably going to recommend you do is upgrade the insulation. The reason why is because insulation provides an extra layer of protection that can protect your house from extreme outdoor temperatures. Plus, insulation also makes it easier for your plumbing and HVAC unit to work effectively.

So if upgrading your house’s insulation sounds like something that you would be interested in doing and you’d like a few helpful tips, here are five recommendations that can save you 30-40 percent on your energy costs each year:

Insulate your attic. There’s a pretty good chance that when you first moved into your house, there was insulation inside of your attic. However, it’s also pretty common that if you inspect it, you might notice there are some holes or extreme signs of wear and tear. So, how much insulation should you actually have? On average, the insulation in your attic needs to be about 12″ thick and made out of an eco-friendly material like cotton or sheep’s wool. That way, your house can be better shielded from extreme heat and cold.

Insulate your pipes. Typically, people do not think to insulate their pipes unless it’s wintertime. For the record, this is a good idea because it helps to keep your pipes from freezing or worse, bursting. At the same time, if you add some fiberglass or foam insulation to your pipes even when it’s not the winter season, this helps to make the hot water in your house warm up in a quicker amount of time. This means that you ultimately end up saving money on your energy costs.

Insulate your basement and crawl space. Making your house energy efficient is about protecting all areas, including your basement and crawl spaces. In fact, by not insulating the bottom of your home, you can inadvertently waste as much as 30 percent of the energy that your house needs. So definitely make sure to insulate your basement and your crawl spaces, too. You can go to DIY Network and put “insulate basement” in the search field for tips on how to do it correctly.

Insulate your ductwork. When it comes to your HVAC unit, something else that you should make a point to apply insulation to is your ductwork. By covering it with fiberglass, it saves energy, prevents condensation, hinders mold and fungi growth, and increases your comfort level. Insulating ductwork makes it easier on HVAC units and programmable thermostats, too.

Insulate your windows and doors. If you happen to walk past your windows or one of your doors and it feels like there is a bit of a draft, there probably is. It’s not uncommon for windowsills and door frames to have small holes or cracks. So, don’t forget to also seal these areas with some caulking or to do a bit of weather-stripping. Also, during the wintertime, if you have single-pane windows, it’s a good idea to apply some window film and hang some thermal curtains. That will keep your windows extra protected from the cold air. For more information on how to properly insulate your windows and doors, visit Houzz or YouTube and put “insulate windows and doors” in the search field.

Related posts:

  1. Common Crawl Space and Basement Moisture Issues
  2. Tankless Water Heater Energy Savings Benefits
  3. How to Winterize Your Home for Maximum Energy Savings
  4. Helpful Advice for Choosing the Right Windows and Doors for Your Home
  5. Have a Moth Problem? 5 Helpful Tips to Eliminate Moths in Your Home
Home Improvement Write for Us